Nokia
Sony Ericsson
Siemens
Samsung
Panasonic
Motorola
Sharp
Lg
Maxon
Innostream
Mitsubishi
Alcatel
Sagem
Xelibri
Philips
Support Area
Original Equipment
Free Software
Contact
E-MAIL

All Original Equipment is in stock!
New support area just for our customer!
.:: ORIGINAL EQUIPMENT ::.
FPS-10 for BB5 Flashing
  .:: News ::.

news...

  Pek kontent
INTRODUCTION for FPS-10
The FPS-10 is intended forprogramming the mobile terminals provided by Nokia.DCT4 and BB5 mobile terminal generations are supported.
The FPS-10 is controlled from PC. There are several interfaces that can be used to connect to the PC: RS-232, USB, and Ethernet. Phoenix SW is used to control the FPS-10 from PC.
First, aspects of setting up the FPS-10 for operation are covered. This is followed by FPS-10 upgrading description.
The sales package contents, power supply, interfaces and LED functions are described.
FPS-10 software set-up, connecting to the PC using different interfaces are followed by start-up sequence description. Second part
focuses on setting up files for mobile terminals and connecting the mobile terminal to the FPS-10.
The software update is described in general view, detailed description covers the hardware upgrade and adding external memory modules.
FPS-11

GENERAL INFORMATION

The FPS-11 unit is a mobile phone programming tool with capability of flashing up to 8 phones at a time controlled by one PC. All communication between PC and flasher unit / phones is handled with single USB 2.0 interface.
In the front panel there are 8 ports for service cables with 4 volt DC outlet in each port. The flasher unit delivers power for the phones under programming so there’s no need for external power supply for powering up the phones.
FPS-11 makes possible to use USB interface as a part of phone programming. The unit acts as an USB HUB to provide USB interfaces for each flashing port – if there’s USB feature in the phone under work - it can be fully used.